现在位置:首页 > 微波射频和天线设计 > ADS > 设计讨论 > ADS仿真显示窗口中的问题

ADS仿真显示窗口中的问题

录入:mweda    点击:
hpeesofsim (*) 2008.500 Jan 22 2008 (built: 01/22/08 22:02:45)
Copyright Agilent Technologies, 1989-2008.
Message from hpeesofsim during netlist parsing.
Booting of Freescale RF Power Kit ADS2008U2v1p3 was successful!
HB HB2[1]
Krylov-HB: 1201 freqs, 4096 time-samples.
Switching to source-stepping...
Attempting solution at `sourceLevel' value of 0.5:
*** Solution FAILED for `sourceLevel' value of 0.5.
Attempting solution at `sourceLevel' value of 0.25:
*** Solution FAILED for `sourceLevel' value of 0.25.
Attempting solution at `sourceLevel' value of 0.125:
Solution succeeded for `sourceLevel' value of 0.125.
Attempting solution at `sourceLevel' value of 0.375:
*** Solution FAILED for `sourceLevel' value of 0.375.
Attempting solution at `sourceLevel' value of 0.25:
Solution succeeded for `sourceLevel' value of 0.25.
Attempting solution at `sourceLevel' value of 0.5:
*** Solution FAILED for `sourceLevel' value of 0.5.
Attempting solution at `sourceLevel' value of 0.375:
*** Solution FAILED for `sourceLevel' value of 0.375.
Attempting solution at `sourceLevel' value of 0.3125:
Solution succeeded for `sourceLevel' value of 0.3125.
Attempting solution at `sourceLevel' value of 0.4375:
Solution succeeded for `sourceLevel' value of 0.4375.
Attempting solution at `sourceLevel' value of 0.6875:
*** Solution FAILED for `sourceLevel' value of 0.6875.
Attempting solution at `sourceLevel' value of 0.5625:
---------------------------------------
----- Simulator Abort in Progress -----
----- Please Wait -----
---------------------------------------
Flushing data buffers for abort ... please wait ...
... (this could take up to several minutes, depending on simulation size) ...
以上为仿真窗口中的数据,里面显示“FAILED”和“succeeded”,后面的数据代表什么啊,如0.5一直到后面的0.5625:。谢谢了哈

声明:网友回复良莠不齐,仅供参考。如需更专业系统地学习ADS,可以购买资深专家讲授的ADS最新视频培训课程

上一篇:使用ADS2009仿真Freescale管子时的问题
下一篇:各位:如何提高Momentum的仿真速度

ADS培训教程和培训视频more...
ADS视频学习培训教程