那楼主知道Insertion Loss和Return Loss的定义是什么吗？写出来S参数计算这两个Loss的公式来就清楚了。
不要说你不知道，就算你真的不知道，上网去搜。外事问谷歌、内事问百度、学术问维基，天涯咱就先不用去了……。
仿真出的结果里 在匹配的条件 下 就是反射系数等于S（1，1） 可以算得RL。只要算频带内最值的情况么？特地搜了下。那个IL还是不太清楚怎么算。
找到了。Google还是好用 上次用百度搜的云里雾里的。下次再也不用百度了。
在维基百科上可以查到Return Loss、Insertion Loss、S Parameters和Gain的定义：
Return loss is the negative of the magnitude of the reflection coefficient in dB. Since power is proportional to the square of the voltage, return loss is given by,
where the vertical bars indicate magnitude. Thus, a large positive return loss indicates the reflected power is small relative to the incident power, which indicates good impedance match from source to load.
Return loss is identified with the S-parameter S11 from two-port network theory.
Insertion Loss usually also represented in dB, is given by:
Since insertion loss is, by definition, a loss (or, negative gain), the resulting negative sign is often neglected. Insertion loss is commonly mistaken for (above), and deserves special consideration here. The difference between them is that penalizes the device for mismatch at the input, while insertion loss is not a function of the input or source impedances. This can be further expressed as:
，where Pav is the available power from the source
，where Pin is the power that makes it into port 1 of the network。
附上g的定义：
Scalar logarithmic gain
The scalar logarithmic (decibel or dB) expression for gain (g) is
This is more commonly used than scalar linear gain and a positive quantity is normally understood as simply a "gain'... A negative quantity can be expressed as a 'negative gain' or more usually as a 'loss' equivalent to its magnitude in dB. For example, a 10 m length of cable may have a gain of - 1 dB at 100 MHz or a loss of 1 dB at 100 MHz.
谢谢版主 仿真结果洗白。tuning中。
声明：网友回复良莠不齐，仅供参考。如需更专业系统地学习ADS，可以购买资深专家讲授的ADS最新视频培训课程。
