Iteration/Trial #0:
CurrentEF: 2499.99999991314
Optimization variables:
TL2.L = 22.2767e-03
TL1.L = 22.2767e-03
Nominal Optimization found no improvement in performance.
The initial solution may be an optimal solution under the constraints.
Possible remedies include:
- Try a different optimization method. Perhaps Random first,
Gradient second.
- Check to insure optimization variables are sensitive to goals.
- Relax the specification, later re-tightening.
- For Random-type optimizers, increase the number of trials.
- If the simulation fails to converge for Random-type optimizers,
try using a Gradient method.
- Check that the Error Function "EF" is not initially zero.
If it is, you may tighten the specification.
Optim1[1] reached the iteration limit.
Resource usage:
Total stopwatch time: 11.66 seconds.
-------------------------------------------------------------------------------
Simulation finished: dataset `adsms' written in:
`E:usersdefaultads_prj/data'
-------------------------------------------------------------------------------
前面那个那个s-parament是我开始弄错了用log扫描留下的
未命名.rar (19 K)
2499也差太远了吧，结构原理有问题吧，要不就是你设错了
优化方式你就选那个 Gradient，应该很快就能收敛了
OPTIM Optim1[1] optIter=(0->80)
SP Optim1[1].SP1[0] optIter=0freq=(2.2 GHz->2.6 GHz)
..........................................
Iteration/Trial #0:
CurrentEF: 2498.98126301429
Optimization variables:
TL1.L = 1e-03
TL2.L = 1e-03
Iteration/Trial #1:
CurrentEF: 2478.05290788602
Optimization variables:
TL1.L = 49.9933e-03
TL2.L = 481.214e-06
。
SP Optim1[1].SP1[54] optIter=54freq=(2.2 GHz->2.6 GHz)
.................................
.........
Iteration/Trial #55:
CurrentEF: 1.15108786323448
Optimization variables:
TL1.L = 47.7068e-03
TL2.L = 26.403e-03
SP Optim1[1].SP1[55] optIter=55freq=(2.2 GHz->2.6 GHz)
..........................................
Iteration/Trial #56:
CurrentEF: 0.0364796239559944
Optimization variables:
TL1.L = 47.7045e-03
TL2.L = 26.403e-03
SP Optim1[1].SP1[56] optIter=56freq=(2.2 GHz->2.6 GHz)
..........................................
Iteration/Trial #57:
CurrentEF: 0
Optimization variables:
TL1.L = 47.7045e-03
TL2.L = 26.4058e-03
SP Optim1[1].SP1[57] optIter=57freq=(2.2 GHz->2.6 GHz)
..........................................
Optim1[1] reached the goals.
Resource usage:
Total stopwatch time: 24.33 seconds.
-------------------------------------------------------------------------------
Simulation finished: dataset `RF_MT' written in:
`E:ADS_PROMTOPT_prj/data'
-------------------------------------------------------------------------------
声明：网友回复良莠不齐，仅供参考。如需更专业系统地学习ADS，可以购买资深专家讲授的ADS最新视频培训课程。
