error:
port 13 does not resolve to a single face
warning:
could not resolve port 13
error:
port20 does not resolve to a single face
warning:
could not resolve port 20
error:
port21 does not resolve to a single face
warning:
could not resolve port 21
error:
port25 does not resolve to a single face
warning:
could not resolve port 25
warning:
if the geometry contains lines that are within 1.25 degree of parallel
they will be treated as parallel because the layout resolution is relatively
coarse for this geometry,please increase the layout resolution if this causes problem。
generating mesh at 4.8GH
warning:
unable to correctly process port19
error:
via may not coincide withport or touch port。
please modify geometry
求射频工程师指点
从报错看是端口的位置放得有问题,可以稍微挪一下端口位置,如挪到金属内部
谢谢指点,但我还有疑问下面的错误是什么意思
error: )=5 ,SIT
via may not coincide withport or touch port。 HMl M!Xk?
please modify geometry
我在layout layers中设置Alumina [via]hole这一层时,怎么设置啊,是不是在这一步出的错。
你好,我也遇到了和你一样的问题,请问你是怎么解决的呢?
看ads帮助文件,上面解释的很清楚
声明:网友回复良莠不齐,仅供参考。如需更专业系统地学习ADS,可以购买资深专家讲授的ADS最新视频培训课程。