下了sp1。不过我还没装2008呢，呵呵，暂时用2006b了
楼主直接放上来好了,方便大家,呵呵
一共40M呢 呵呵
期待中！楼主若下了！上传共享吧！
谁能下？下了放这里吧。方便大家。
Service Pack – Jan-18-2008
General / Environment
A DLL to read CST STUDIO SUITE? results in MATLAB or in other external tools is available now.New Feature！
The ADS link is available for 64 bit now. New Feature！
Distributed Computing
Fixed deadlock while waiting for a process to start.
Setting of main controller also influenced other open DE.
Fix issue of main controller when aborting a parameter sweep while waiting for license.
Post processing was not started immediately after all jobs have been submitted.
Aborting of whole parameter sweep was not possible if ports were distributed.
A file for simulations with a mirror plane was not copied.
Modeler
Removed memory leak in Extrude from Picked Faces command.
Fixed problem with unit cells and combine results.
Removed inconsistency with special transient solver parameter command (UseArfilter) in combination with fast model update.
Fixed issue that changing the units does not update the QuickStart Guide.
Repaired extended mode for 3D bondwires.
Wrong sub grid hex mesh creation with Field Sources resolved.
Fixed modeler issue when saving model under different name.
Fixed problems with 3D contour plots for surface current.
Problem when closing modeler frame while opening another frame fixed.
Special treatment for checking in tetrahedral and surface meshing licenses during parameter sweeps and optimizations implemented.
Fixed rare inconsistency in command Move Selected Face invoked with all three parameters to zero in combination with fast model update.
Loading the context menu in 2D/3D-Results does no longer recalculate the view if the tree item was already selected.
Archive as without results, now generates a new archive.
Fixed graphics display issue on Windows Vista.
Implemented automatic detection of 2D- and 3D-models in Sub-Project dialog.
Hexahedral Mesh
Improved discrete face port setup.
Fixed subgrid smoothing for current distribution import boxes.
For discrete face ports the fallback to edge ports was not possible.
Fixed PBA matrix calculation crash during port adaptation if ACIS model is corrupt.
Transient Solver/ Solver General
Fixed issue due to Japanese project path
Fixed eigenmode accuracy problem for examples with periodic boundary conditions and losses.
Fixed port mode accuracy problem.
Transient solver optimizer with activated subgrids was running without showing any message boxes.
A warning is printed now, instead of hiding the efficiencies in case of renormalized ports.
Fixed issue in combine results when 2D monitors were defined and tetrahedral mesh was active.
Corrected solver dialog initialization for plane wave excitation.
Changed power loss density plot labeling to RMS instead of peak.
Mesh cell count is updated correctly now during port mesh and 3D adaptation.
Template based postprocessing steps are now performed correctly after modes only calculation with adaptiveport meshing.
Fixed the calculation of the dispersive material coefficients after file open.
Restored old folder structure for storing parameter runs and adaptation passes in result cache.
Fixed error in transfer of data from hardware card for 3D monitors.
Fixed license error for D30 hardware accelerator in solver specials user interface.
Plane wave direction is now checked against the specified symmetry planes.
Unit scaling of the auto-detected mirror plane corrected.
Removed transient solver parallelization limitation for small mesh cell number.
Frequency DomainSolvers
The solvers required too many frequency samples if the frequency range was split into intervals with a fixed upper limit for the number of samples.
The port mode solver eventually terminated when using thin conductors and multipin ports.
Fixed an abnormal termination of the solver with first order which occurred after many samples.
Fixed a problem concerning the unit cell waveguide port mesh generation in non-rectangular unit cells.
Integral Equation Solver
Bug fix for E-/H-field monitor calculation.
Bug fix for monostatic RCS calculation when theta_end is greater then 180.
Changed MLFMM accuracy settings and default value in solver specials dialog.
Changed Ohmic Sheet from impenetrable to penetrable. New Feature！
New iterative solver available. New Feature！
CST EM STUDIO Solvers
Corrected calculation of thermal volume losses.
CST PARTICLE STUDIO Solvers
Fixed error in particle ASCII export.
GUN calculation without electrostatic sources is now possible.
Particle sources can not be defined on sheets anymore.
Post Processing / Fields
Fixed H field direction as consistent to the Poynting vector.
Fixed table properties dialog cancel button for special table constellations.
Fixed table properties dialog for mesh adaption.
Implemented combine results for unit cell farfields. New Feature！
Fixed asymmetric H field interpolation on PEC surfaces.
Touchstone export was exporting transposed s-matrix due to error in renormalization.
Farfield
Fixed problem for combine results with broadband farfield monitors and added warning, that the feature is not available.
CST DESIGN STUDIO
Wrong sign for 'Attenuation' property of Ideal Phase Shift block fixed, backward compatibility ensured.
Missing documentation ofUpdate Files dialog box in Online Help added.
AR filter results were initially not considered by default for MWS file block.
Upper substrate layer was added too often for stripline stackup.
Thickness of metal layer was added to elevation of upper substrate of a stripline stackup.
Message added in case both S-Y and S-Z conversion fail for block.
Wrong treatment for Touchstone blocks with zero reference impedance fixed.
A message concerning an old APLAC message was displayed while launching DE even in batch mode.
Wrong reference impedance could be used for some frequency samples in circuit simulations with APLAC or SPICE.
Excitation for Combine Results were not stored correctly in S-Parameter task.
VBA / Macros
Adaptive port meshing VBA command: Removed unnecessary checks, try to get adapted results first.
Bugfix in macro Farfield / I-Solver Monostatic RCS Calculation.
1_cst.jpg
期待中。
:49bb
本站好像提供了下载连接了吧
CST2008目前为止共三个补丁，最近的是今年1月底的Sp3，版本号为2008.03，一般国内要晚些时候才提供。
声明：网友回复良莠不齐，仅供参考。如需更专业系统地学习CST，可以购买资深专家讲授的CST最新视频培训课程。
