现在位置:首页 > 微波射频和天线设计 > CST微波工作室 > CST使用讨论 > 我是仿真微波谐振腔的S参量用CST2006,不知怎么老出现这个警告,希望大家帮我看看

我是仿真微波谐振腔的S参量用CST2006,不知怎么老出现这个警告,希望大家帮我看看

录入:mweda    点击:
At least 1 propagating mode at port 2 is not considered in calculation!
1 mode shares the same beta with considered mode(s) -> degeneration
It might be better to increase the number of modes at port 2
--------------------------------------------------------------------------------
*** Warning ***
At least 1 propagating mode at port 1 is not considered in calculation!
1 mode shares the same beta with considered mode(s) -> degeneration
It might be better to increase the number of modes at port 1

下面是我设置的波导端口的参数
Port Mode TypeZ-WaveZ-Wave-SigmaZ-LineF-Cutoff
11TE 147 3.74e-014 --- 4.78
----------------------------------------------------------------------------
--------------------------------------------------------------------------------
Port: 2
--------------------------------------------------------------------------------
----------------------------------------------------------------------------
Port Mode TypeZ-WaveZ-Wave-SigmaZ-LineF-Cutoff
21TE 147 3.74e-014 --- 4.78

顶一下!没人看,自己顶一下!没人看,自己顶一下!没人看,自己顶一下!

声明:网友回复良莠不齐,仅供参考。如需更专业系统地学习CST,可以购买资深专家讲授的CST最新视频培训课程

上一篇:如何在CST MWS中设计周期边界条件来模拟一个无限大的阵列
下一篇:远场探针的使用问题:如何能够得到样品的反射系数又不影响波的偏振态呢?

CST视频培训教程
CST天线设计培训教程