现在位置:首页 > 微波射频和天线设计 > HFSS > 使用讨论 > HFSS里设计 共面线结构怎么样放置过孔?

HFSS里设计 共面线结构怎么样放置过孔?

录入:mweda    点击:
如题,设计一单端的共面线结构,传输线两侧需放置过孔将上下两层地平面连接过来。我直接放了一个圆柱在上下两层之间,出现提示如下:
[error] Objects "Ground" and "Cylinder1" intersect. (2:26 ? ?t? 14, 2008)
[error] Objects "Ground" and "Cylinder1_1" intersect. (2:26 ? ?t? 14, 2008)
[error] Objects "Ground" and "Cylinder1_2" intersect. (2:26 ? ?t? 14, 2008)
[error] Objects "Ground" and "Cylinder1_3" intersect. (2:26 ? ?t? 14, 2008)
[error] Objects "Ground" and "Cylinder1_4" intersect. (2:26 ? ?t? 14, 2008)
[error] Objects "Ground" and "Cylinder1_4_1" intersect. (2:26 ? ?t? 14, 2008)
[error] Objects "Ground" and "Cylinder1_4_2" intersect. (2:26 ? ?t? 14, 2008)
[error] Objects "Ground" and "Cylinder1_4_3" intersect. (2:26 ? ?t? 14, 2008)
[error] Objects "Ground" and "Cylinder1_4_4" intersect. (2:26 ? ?t? 14, 2008)
[error] Objects "Ground" and "Cylinder1_4_5" intersect. (2:26 ? ?t? 14, 2008)
[error] Objects "Ground" and "Cylinder1_5" intersect. (2:26 ? ?t? 14, 2008)
[error] Objects "Ground" and "Cylinder1_1_1" intersect. (2:26 ? ?t? 14, 2008)
[error] Objects "Ground" and "Cylinder1_1_2" intersect. (2:26 ? ?t? 14, 2008)
[error] Objects "Ground" and "Cylinder1_1_3" intersect. (2:26 ? ?t? 14, 2008)
[error] Objects "Ground" and "Cylinder1_1_4" intersect. (2:26 ? ?t? 14, 2008)
[error] Objects "Ground" and "Cylinder1_1_5" intersect. (2:26 ? ?t? 14, 2008)
[error] Objects "Ground" and "Cylinder1_1_6" intersect. (2:26 ? ?t? 14, 2008)
[error] Objects "Ground" and "Cylinder1_1_7" intersect. (2:26 ? ?t? 14, 2008)
[error] Objects "Ground" and "Cylinder1_1_8" intersect. (2:26 ? ?t? 14, 2008)
[error] Objects "Ground" and "Cylinder1_1_9" intersect. (2:26 ? ?t? 14, 2008)
[error] Objects "MediumFR25" and "Cylinder1" intersect. (2:26 ? ?t? 14, 2008)
[error] Objects "MediumFR25" and "Cylinder1_1" intersect. (2:26 ? ?t? 14, 2008)
[error] Objects "MediumFR25" and "Cylinder1_2" intersect. (2:26 ? ?t? 14, 2008)
[error] Objects "MediumFR25" and "Cylinder1_3" intersect. (2:26 ? ?t? 14, 2008)
[error] Objects "MediumFR25" and "Cylinder1_4" intersect. (2:26 ? ?t? 14, 2008)
[error] Objects "MediumFR25" and "Cylinder1_4_1" intersect. (2:26 ? ?t? 14, 2008)
[error] Objects "MediumFR25" and "Cylinder1_4_2" intersect. (2:26 ? ?t? 14, 2008)
[error] Objects "MediumFR25" and "Cylinder1_4_3" intersect. (2:26 ? ?t? 14, 2008)
[error] Objects "MediumFR25" and "Cylinder1_4_4" intersect. (2:26 ? ?t? 14, 2008)
[error] Objects "MediumFR25" and "Cylinder1_4_5" intersect. (2:26 ? ?t? 14, 2008)
[error] Objects "MediumFR25" and "Cylinder1_5" intersect. (2:26 ? ?t? 14, 2008)
[error] Objects "MediumFR25" and "Cylinder1_1_1" intersect. (2:26 ? ?t? 14, 2008)
[error] Objects "MediumFR25" and "Cylinder1_1_2" intersect. (2:26 ? ?t? 14, 2008)
[error] Objects "MediumFR25" and "Cylinder1_1_3" intersect. (2:26 ? ?t? 14, 2008)
[error] Objects "MediumFR25" and "Cylinder1_1_4" intersect. (2:26 ? ?t? 14, 2008)
[error] Objects "MediumFR25" and "Cylinder1_1_5" intersect. (2:26 ? ?t? 14, 2008)
[error] Objects "MediumFR25" and "Cylinder1_1_6" intersect. (2:26 ? ?t? 14, 2008)
[error] Objects "MediumFR25" and "Cylinder1_1_7" intersect. (2:26 ? ?t? 14, 2008)
[error] Objects "MediumFR25" and "Cylinder1_1_8" intersect. (2:26 ? ?t? 14, 2008)
[error] Objects "MediumFR25" and "Cylinder1_1_9" intersect. (2:26 ? ?t? 14, 2008)
[error] Objects "Ground2" and "Cylinder1" intersect. (2:26 ? ?t? 14, 2008)
[error] Objects "Ground2" and "Cylinder1_2" intersect. (2:26 ? ?t? 14, 2008)
[error] Objects "Ground2" and "Cylinder1_3" intersect. (2:26 ? ?t? 14, 2008)
[error] Objects "Ground2" and "Cylinder1_4" intersect. (2:26 ? ?t? 14, 2008)
[error] Objects "Ground2" and "Cylinder1_4_1" intersect. (2:26 ? ?t? 14, 2008)
[error] Objects "Ground2" and "Cylinder1_4_2" intersect. (2:26 ? ?t? 14, 2008)
[error] Objects "Ground2" and "Cylinder1_4_3" intersect. (2:26 ? ?t? 14, 2008)
[error] Objects "Ground2" and "Cylinder1_4_4" intersect. (2:26 ? ?t? 14, 2008)
[error] Objects "Ground2" and "Cylinder1_4_5" intersect. (2:26 ? ?t? 14, 2008)
[error] Objects "Ground2" and "Cylinder1_5" intersect. (2:26 ? ?t? 14, 2008)
[error] Objects "Ground3" and "Cylinder1_1" intersect. (2:26 ? ?t? 14, 2008)
[error] Objects "Ground3" and "Cylinder1_1_1" intersect. (2:26 ? ?t? 14, 2008)
[error] Objects "Ground3" and "Cylinder1_1_2" intersect. (2:26 ? ?t? 14, 2008)
[error] Objects "Ground3" and "Cylinder1_1_3" intersect. (2:26 ? ?t? 14, 2008)
[error] Objects "Ground3" and "Cylinder1_1_4" intersect. (2:26 ? ?t? 14, 2008)
[error] Objects "Ground3" and "Cylinder1_1_5" intersect. (2:26 ? ?t? 14, 2008)
[error] Objects "Ground3" and "Cylinder1_1_6" intersect. (2:26 ? ?t? 14, 2008)
[error] Objects "Ground3" and "Cylinder1_1_7" intersect. (2:26 ? ?t? 14, 2008)
[error] Objects "Ground3" and "Cylinder1_1_8" intersect. (2:26 ? ?t? 14, 2008)
[error] Objects "Ground3" and "Cylinder1_1_9" intersect. (2:26 ? ?t? 14, 2008)
[warning] Boundary Setup: Warning - The port impedance multiplier is set to 50, but no symmetry boundaries have been defined. (2:26 ? ?t? 14, 2008)

提示的错误是你的过孔和你的基片以及地之间相交了.
建议你把过孔的高度设计来正好连接到两边两个地就可以了,不用让他们相交.还有就是需要在基片中减去你画上去的过孔,这样就可以了

上面问题已经解决, 谢谢!
另外还有个问题,显示
[warning] Boundary Setup: Warning - The port impedance multiplier is set to 50, but no symmetry boundaries have been defined. (11:32 é? ?t? 18, 2008)
这个是什么问题?

声明:网友回复良莠不齐,仅供参考。如需更专业、系统的学习HFSS,可以购买本站资深专家讲授的HFSS视频培训课程

上一篇:仿真中的airbox尺寸
下一篇:如何使用频率选择表面自动进行s参数的计算

HFSS视频培训课程