file:///C:/DOCUME%7E1/antboy/LOCALS%7E1/Temp/moz-screenshot-2.jpgfile:///C:/DOCUME%7E1/antboy/LOCALS%7E1/Temp/moz-screenshot-3.jpg
提示如下：
6A dipole_1 (F:/Ant design/HFSS11 Beta/)
HFSSDesign1 (DrivenModal)
[error] Communication failure. System error no: 109, error description:Unknown error (11:39 下午八月 17, 2007)
[error] Communication failure. System error no: 0, error description:No error (11:39 下午八月 17, 2007)
[error] Adaptive solution setup, process hf3d exited with code 259. (11:39 下午八月 17, 2007)
[error] Simulation completed with execution error on server: Local Machine. (11:39 下午八月 17, 2007)
是啊，但我同事的老机子是装上的拉，可能是我机子的问题吧
都出11了，我10还刚用上呢，不过10比9的确有所改进，不知道11改进了什么
Version 11.0 Major Enhancements
===============================
Solving:
- Higher-order basis functions incorporated for improved accuracy and solution efficiency
- Improved port-solver to handle lower frequencies, and decrease noise floor
- Analytic ports for rectangular, circular, and coaxial port geometries to improve modal
consistency and port accuracy
- Iterative solver option reduces RAM requirements for large solutions and makes use of
multiple processors to handle more than one excitation
Meshing:
- Higher-quality tetrahedra with lower aspect-ratio to promote faster convergence
Floquet Ports:
- Produce higher accuracy at large scan angles
- Provide additional information that is particularly useful for periodic structures, such
as phased-array antennas and frequency-selective surfaces: separation of fields into
modes, phase information available for each mode
Screening Impedance Boundary:
- Available to replace geometrically complex periodic screens or grids
- Isotropic or anisotropic impedance can be specified directly or through a link to another
unit-cell design
Incident Fields:
- Total-field formulation now uses E- and H-field information from the incident wave
- Incident field from small current loop is now available
Design Link:
- SIWave-HFSS and HFSS-HFSS links based on E- and H-fields
- Additional option to update source field pattern at each adaptive pass
Distributed Solve Option:
- Automatic distribution of individual discrete and interpolating sweep frequencies to different
nodes
- Distributed solve available for all Optimetrics' setups, including Optimization, Sensitivity,
and Statistical Analysis
Optimetrics:
- Addition of Genetic Algorithm
- Latin Hypercube Sampling now included in statistical analysis setup
Desktop:
- Toolbar customization
Modeler:
- Upgrade to ACIS R16 SP6
- Auto-assignment of terminals at port setup eliminates need for terminal lines
- New commands: Region, Thicken Sheet, Sweep Face Along Normal
- Enhanced manual-healing GUI and more advanced auto-healing procedure during geometry import
- CATIA v4 and v5 geometry import now available
- GDSII export now available
Post-Processing:
- Fully scriptable new report editor and 2D plot GUI
- Copy and paste of data from one report to another
- Generation of report templates
- Ranged functions to extract calculations such as maximum, minimum and average from a plot
or dataset
- Mesh statistics available in the solution data panel
- Antenna parameters: front-to-back ratio as part of antenna parameters; 3-dB beamwidth and
sidelobe levels included as part of the ranged functions
另外有一点，我想说的是：
不要动不动就把问题规到Crack上。其实，要校验Crack是否有问题，很简单，真正又有多少人做过？
现在的软件、资料都来得太容易，人们很容易浮躁，我们需要做的是Design，而不是拿个软件随便跑跑。要用好这些软件，首先得有基本功。
大家要把HFSS-VCRedist-vcredist_x86.exe先运行一下，这样才能装的上
还有就是无论路径还是文件名还有里面的名称也不要出现中文，
我的机器装上就挺好用的，我同事他们就有的用不起来
1.我昨天装了一下,当时我的也报错了,发现是FLEXID装不上,后来发现是和我的杀毒软件有冲突,关闭杀毒软件后(当然你首先要确定你的HFSS内不含毒,用杀毒软件扫一下)重装了一遍后通过。
2.然后，把HFSSFIX.COM拷贝到你的---：“某盘：AnsoftHFSS10” 文件下下，双击‘HFSSFIX.COM”。
3.把license.lic拷贝到你的---：“某盘：Ansoftadmin”文件夹下即可！
我用HFss11 beta 好像还好吗。只是有些小问题。
我今天刚装上,感觉不错
就是暗装之前先运行一下HFSS>>VCRedist-vcredist_x86.exe后再安装就 没问题了
不然就会报错,说什么应用程序出错
:happy :happy :happy
我用9和10都不停的报错说硬盘空间不够
自从用了v11，跑麻麻顺，从来不错
声明：网友回复良莠不齐，仅供参考。如需更专业、系统的学习HFSS，可以购买本站资深专家讲授的HFSS视频培训课程。
